Cavity beam position monitor system for the Accelerator Test Facility 2. / Kim, Y.I. ; Ainsworth, Rob; Aryshev, A.; Boogert, Stewart ; Boorman, Gary; Frisch, J.; Heo, A; Honda, Y.; Hwang, W. H.; Huang, J Y ; Kim, E. -S.; Kim, S.H; Lyapin, Alexey; Naito, T.; May, J.; McCormick, D.; Mellor, R.E.; Molloy, Stephen; Nelson, J.; Park, S. J.; Park, Y.J; Ross, M.; Shin, S; Swinson, C.; Smith, T.; Terunuma, N.; Tauchi, T.; Urakawa, J.; White, G.R.
In: Physical Review Special Topics: Accelerators and Beams, Vol. 15, No. 4, 2012.Research output: Contribution to journal › Article
Published
Documents
3 MB, PDF-document
29/08/12
Links
Abstract
The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the ATF2 diagnostics. Two types of cavity BPMs are used, C-band operating at 6.423 GHz, and S-band at 2.888 GHz with an increased beam aperture. The cavities, electronics, and digital processing are described. The resolution of the C-band system with attenuators was determined to be approximately 250 nm and 1 μm for the S-band system. Without attenuation the best recorded C-band cavity resolution was 27 nm.
| Original language | English |
|---|---|
| Journal | Physical Review Special Topics: Accelerators and Beams |
| Journal publication date | 2012 |
| Journal number | 4 |
| Volume | 15 |
| DOIs | |
| State | Published |
This open access research output is licenced under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.
ID: 4706914